RACER RESIN REGIONAL
DATE/TIME (all times Eastern): Friday, 7/17/09,
Track open from 5:00pm - 7:00pm for practice. Around 7pm tech inspection to start, racing target start time is 8pm. Race heat length for each lane depends on number of entries. A GTSLOTS supplied Slot.IT orange endbell 21.5k RPM motor will be issued to racers for this race, to be returned at end of the race.
ELIGIBLE CARS:
Any Racer Resin brand car, kit or RTR, is allowed. Kits must be complete with all the parts that come in the kit. As new cars are introduced they will become eligible. Click this link for example cars:
THE BODY:
Bodies must not be modified or cut in any way, exception being thinning the resin for tire clearance. Kit cars must have numbers showing on front and sides of the body. Cars must start each race with all parts intact except for mirrors, wipers and antennas. All cars must start with rear wing in place, if it comes on original model. Bodies can be painted. Bodies must be attached to chassis using provided screws in stock location. If body screws are run loose, tape must be placed over holes in bottom of chassis. Car must have interior, Slot.IT lexan interiors are allowed. Windows must remain transparent.
CHASSIS:
Racer chassis only w/Slot-it motor pods. NO TRACTION MAGNETS. Inline & sidewinder motor pods only, standard or offset. Sanding edges of motor pods and chassis for float is legal.
No modifications to axle mounts front or rear is permitted. Front axle ride height
adjusting blocks must be in place. The complete interior must be used and no modification or lightening is allowed. Axle shims and/or stoppers are allowed.
WHEELS AND TIRES:
Racer or Slot.IT wheels must be used. Slot.IT F1 wheels not allowed. The correct inserts for the wheel must be used. Any Slot.IT silicone tire (except F1) Indy Grip P/N 3003 tires allowed on rear. Slot.IT Zero grips or stock Racer tires can be used on the front. Rear tires may extend past body by no more than 1mm. Original inserts must be used but may be painted. No chemicals may be used on the tires.
GUIDE BLADES:
Any Slot-it or Racer guide blades are allowed.
Any manufacture braid and wire can be used-must be attached to guide through
Slot-it eyelets and may not be glued or soldered.
MOTOR:
Only Slot-it "Orange endbell" motor is legal (21,500 rpm @ 12volts)
Any Slot-it pinion may be used. Motor to be supplied by GTSLOTS and returned after the race.
GEARING:
Any gear ratio is allowed using Slot-it gears
WEIGHT:
Weight may be added to the inside of the chassisl NO weight may be attached to the underside of the chassis.
LIGHTING:
May be added. (Optional) If used must be Slot-it brand.
