MB SLOT 2009 NATIONAL FINAL
DATE/TIME (all times Eastern): TBA. Click here for a listing of those who have already qualified for the final from regional races:
ENTRY FEE: TBA
Times: TBA
Any shops, clubs or slotcar organizations interested in holding a regional event call Rich @ GT Slots: 267-250-1735
ELIGIBLE CARS:
BBR Ferrari F430, MB Slot Pagani Zonda. Any livery released in North America. (click here for example pictures)
GENERAL:
Any MB Slot part is allowed, as long as it doesn't conflict with any other rules specified here. If the rules stated on this page do not indicate a part or tuning method IS allowed, it is NOT allowed.
THE BODY:
Bodies must not be modified or cut in any way-including wheel wells.
Cars must start each race with all parts intact (except for mirrors, wipers, antennas) All cars must start with rear wing in place. Bodies can be painted. Simple paint is allowed but all cars must have numbers and look like race cars. Bodies must be attached to chassis using provided screws in stock location. If body screws are run loose, tape must be placed over holes in bottom of chassis. Windows must remain transparent.
CHASSIS:
Stock chassis, inline only. NO TRACTION MAGNETS. No modifications to axle mounts front or rear is permitted. The complete interior must be used and no modification or lightening is allowed. Axle shims and/or stoppers are allowed.
WHEELS AND TIRES: (updated 8/24/09, 8/30/09)
The stock front and rear wheels may be replaced by any MB Slot, SCX Pro, or Slot.IT aluminum wheels, except Slot.IT F1 wheels. Rear tires must be Slot.IT S1 or S2 silicone tires, provided by GTSLOTS on race day as part of entry fee. Rear tires may extend past body by no more than 1mm (.040). No chemicals may be used on the tires. No chemicals may be used on the tires.
GUIDE BLADES:
Stock guide blade may be any MB Slot guide. Any manufacture braid and wire can be used-must be attached to guide through eyelets and may not be glued or soldered.
MOTOR:
Motor shall be of following rating, which will be provided by GTSLOTS at the race:
FK-180 (long can) 23,800 RPM/12v, 186 gcm/12v
GEARING: (updated 8/30/09)
Any gear ratio is allowed using MB Slot, SCX Pro or Slot.IT gears.
WEIGHT:
Weight may be added to the inside of the chassis (NO weight may be attached to the underside of the chassis.)
LIGHTING:
May be added (optional)
